IP66-2W, IP66 Empty Outdoor Junction Box, 166 × 188 × 108 mm

IP66-2W empty outdoor enclosure with a gray ABS plastic base, smoked hinged cover and 2 front latches. The supplier identifies this as the without-socket configuration. Use the exterior dimensions and product images to select an enclosure for a separately specified installation.

Specifications

Exterior dimensions are approximate supplier references. The 30 mm annotation refers to the circular cable-entry knockout in the source image. It does not specify the cable gland thread or usable cable diameter.

Package contents

Select 1, 10, 50 complete enclosure units. Each unit is the corresponding empty enclosure with its hinged cover and latch assembly. The matching supplier SKU image shows an accessory kit consisting of four long screws, two short screws, four wall plugs, four sealing caps and one cable gland.

Socket modules, plugs, cables, tools and terminal blocks shown in application examples are separately specified installation components. Internal usable dimensions and the internal mounting-plate arrangement should be confirmed with our sales team before ordering if required.

Installation and selection

1. Check the exterior dimensions and allow clearance for opening the hinged lid.
2. Plan the surface-mounting position and the required cable entries before making any openings.
3. Fit entry seals and glands appropriate to the actual cables. Seal unused entries and mounting penetrations.
4. Complete the separately specified internal electrical installation, then close the cover and engage all latches.

The supplier marks the enclosure IP66. Protection depends on the complete installed assembly, including the lid closure, cable glands and sealed penetrations. Electrical ratings, certification, cable-clamping range and operating temperature have not been established for this empty enclosure.

Series construction references

The gallery includes close-up supplier references for the latch/lock-loop area and cable-exit sealing structure from the same enclosure series. Latch-face markings vary across the supplier photographs. The illustrated padlock is supplied separately. These closeups illustrate the external enclosure structure and do not specify an internal socket or mounting-plate configuration.